Millers Classic Running In Oil – SAE 30 5 Litre


Millers Classic Running In Oil 30 is a SAE 30 mineral based running in oil for vintage and classic engines. This product is designed for the initial running in of re-built engines. Use of this product optimizes performance and fuel efficiency.

Use as received for initial running in of re-built engines. Formulated for running in on the road. Can be used for test bed running. Run engine at peak torque to ensure maximum bedding-in of piston rings. Drain and refill with the Millers Classic lubricant most suitable for the engine. Note: Do not use high performance oils before the bedding-in process is complete.

• High quality mineral oil formulated to solve the problems experienced when reconditioned engines do not bed-in.
• Provides full protection to highly stressed valve gear/associated components whilst allowing piston rings to bed in against the bore.
• Suitable for 500 miles after which it should be replaced with the appropriate Millers Oils classic engine oil.
• Good running in will optimise the performance and fuel efficiency of a reconditioned engine.

Designed to provide the performance of API SE/CC. Suitable for 500 miles road use. Very low leak down [4%] obtained after thorough running in process.

  • 5 Litre

£30.83 £37.00 inc. VAT